Description
FLEXI-DIP Gauging Tapes (Restricted and Open) Restricted and Open Gauging Tapes provide a convenient and accurate means for measuring ullage, product temperature and the oil-water interface. The units are configured to operate in the trimode, bimode, interface or temperature mode. Each instrument is designed to maximize ease of use. A single penetration of each tank can provide comprehensive data about internal tank conditions. When the electronic probe senses hydrocarbon, a steady tone is heard; when sensing water, it emits an intermittent tone. Temperature is shown on an LED display in the hub of the instrument.
Specifications
| Accuracy | |
| >of Tape | +/- 1/8″ (+/- 3mm), +/- 0.01% of F.S. tape LGT (F.S. = Full Scale). |
| >of Temperature Display | +/- 0.5° F (+/- 0.3° C) +/- 1 digit error. |
| >of Calibration Range | 32° F (0° C) to 176° F (80° C). |
| >of Probe | For dryness to within 3/8 inch (10mm) of bottom |
| Ambient Temperature Limits | |
| >LCD | same as above. |
| >Sensor | same as above. |
| Application: | |
| >Open gauging | (“O” type) (Safe product vapors only). |
| >Restricted gauging | (“R” type) via MMC vapor-control valve. |
| Battery | 9-Volt Eveready # 522 or Mallory MN1604. |
| Operation | U-Ullage, I-Interface (oil/water), T-Temperature. |
| Tape Length | Tape Length |
| >Dual-Marked | 50 ft. (15m), 75 ft. (25m), 100 ft. (30m), 120 ft. (37m),165 ft. (50m). |
| >Single-Sided | 30m, 100 ft. engineering scale (ft., 1/10 ft., 1/100 ft.) |
| Typical Weights | >50 ft/15m – “R” 8lbs (3.6kg) “F” 7 lbs. (3.2kg).
>100 ft/30m – “R” 9lbs (4.1 kg) “F” 8lbs. (3.6kg). >165 ft/50m – “R” 11 lbs (5 kg) “F” 10 lbs. (4.5 kg). |
Reviews
There are no reviews yet.